CASIA OpenIR  > 09年以前成果
Precise Robotic Chamferless Peg-Hole Insertion Operation Without Force Feedback and Remote Centre Compliance (RCC)
QIAO, H; DALAY, BS; PARKIN, RM
1994
发表期刊PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
卷号208期号:2页码:89-104
摘要Robots can be widely used in the industrial assembly operation if the task can be performed with high precision, high speed and with low cost. Peg-hole insertion is a fundamental operation whose problems have been the focus of much work.

In the passive accommodation solution, remote centre compliance (RCC) is used to perform chamfered peg-hole insertion. The principle exploited involves using RCC as a mechanical map which transfers the translational and angular errors, between the peg and the hole, into corrective motion. The potential advantages of minimized cycle times are offset by the limited precision. This contrasts with techniques exploiting active accommodation which use a force sensor to arrive at the deviation, between the peg and hole axes, to achieve chamferless insertion.

A strategy is developed here that uses neither of these additional accessories but instead exploits features of both techniques with defined initial conditions. The immediate advantages of reduced hardware complexity are supplemented by evidence of trials. These were based on a 31.99 mm diameter peg and a hole with a diameter clearance of 0.02 mm. The results showed that the algorithm operated reliably with small clearances and with minimum cycle times. This confirms its potentially wide application in industry where its simplicity can be fully exploited.
关键词Empty
学科领域Engineering, Mechanical
文献类型期刊论文
条目标识符http://ir.ia.ac.cn/handle/173211/12606
专题09年以前成果
通讯作者QIAO, H
作者单位Department of Mechanical and Manufacturing Engineering, De Montfort University
推荐引用方式
GB/T 7714
QIAO, H,DALAY, BS,PARKIN, RM. Precise Robotic Chamferless Peg-Hole Insertion Operation Without Force Feedback and Remote Centre Compliance (RCC)[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,1994,208(2):89-104.
APA QIAO, H,DALAY, BS,&PARKIN, RM.(1994).Precise Robotic Chamferless Peg-Hole Insertion Operation Without Force Feedback and Remote Centre Compliance (RCC).PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,208(2),89-104.
MLA QIAO, H,et al."Precise Robotic Chamferless Peg-Hole Insertion Operation Without Force Feedback and Remote Centre Compliance (RCC)".PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 208.2(1994):89-104.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[QIAO, H]的文章
[DALAY, BS]的文章
[PARKIN, RM]的文章
百度学术
百度学术中相似的文章
[QIAO, H]的文章
[DALAY, BS]的文章
[PARKIN, RM]的文章
必应学术
必应学术中相似的文章
[QIAO, H]的文章
[DALAY, BS]的文章
[PARKIN, RM]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。