CASIA OpenIR  > 09年以前成果
Robotic Peg-Hole Insertion Operations using a Six-Component Force Sensor
QIAO, H; DALAY, BS; PARKIN, RM
发表期刊PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
1993
卷号207期号:5页码:289-306
摘要Peg-hole insertion is a widely used industrial robot process. For precise insertion it is common to use force sensors to obtain the deviation between the peg and the hole. In this paper, several examples of six-component force sensors, which are designed to measure the forces and torques in all directions, are reviewed. The problem of how to obtain the deviation between the peg and the hole from the measurement of the forces and the torques exerted on the sensors is then discussed. It is shown that the angle between the peg and the hole and the roughness of the contact surfaces (the end surface of the peg and the surface surrounding the hole) would significantly influence the identification of deviation, no matter how small they are. Two measures to address these phenomena are introduced.

A novel strategy of the high-precision chamferless peg-hole insertion with a wrist force sensor is presented and verified experimentally. This strategy is constructed: (a) to obtain the relationship between the peg and hole from the force sensor signal when angular misalignment and the defects of the contact surfaces are present, (b) to reduce the angular and lateral errors and (c) to achieve precise chamferless robotic peg-hole insertion.

In this paper, it is shown that the insertion can be effected with a reasonably large range of initial conditions. The principle is to move and rotate the peg from an area having many geometric uncertainties to a new area, where the deviation of the peg and hole can be obtained.
关键词Empty
学科领域Engineering, Mechanical
文献类型期刊论文
条目标识符http://ir.ia.ac.cn/handle/173211/12607
专题09年以前成果
通讯作者QIAO, H
作者单位Department of Mechanical and Manufacturing Engineering, De Montfort University
推荐引用方式
GB/T 7714
QIAO, H,DALAY, BS,PARKIN, RM. Robotic Peg-Hole Insertion Operations using a Six-Component Force Sensor[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,1993,207(5):289-306.
APA QIAO, H,DALAY, BS,&PARKIN, RM.(1993).Robotic Peg-Hole Insertion Operations using a Six-Component Force Sensor.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,207(5),289-306.
MLA QIAO, H,et al."Robotic Peg-Hole Insertion Operations using a Six-Component Force Sensor".PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 207.5(1993):289-306.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[QIAO, H]的文章
[DALAY, BS]的文章
[PARKIN, RM]的文章
百度学术
百度学术中相似的文章
[QIAO, H]的文章
[DALAY, BS]的文章
[PARKIN, RM]的文章
必应学术
必应学术中相似的文章
[QIAO, H]的文章
[DALAY, BS]的文章
[PARKIN, RM]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。