Knowledge Commons of Institute of Automation,CAS
Generating hybrid interior structure for 3D printing | |
Mao, Yuxin1; Wu, Lifang1; Yan, Dong-Ming2; Guo, Jianwei2; Chen, Chang Wen3,4; Chen, Baoquan5; Dong-Ming Yan | |
发表期刊 | COMPUTER AIDED GEOMETRIC DESIGN |
2018-05-01 | |
卷号 | 62期号:0页码:63-72 |
文章类型 | Article |
摘要 | ; Generating an interior support structure is a key issue in 3D model geometric optimization for 3D printing. Most existing interior support structures have been designed by simulating lightweight structures naturally exist. One limitation of the existing method is that only one single structure is used for the model. However, different parts of a 3D model have different shapes and mechanical properties and different structures demonstrate distinctive advantages for supporting the model. Based on such observation, we propose to use hybrid structures for designing an optimal support structure. In this paper, we present a novel scheme of generating hybrid interior support structures for 3D printing. The proposed approach first partitions an input model into parts with different physical behaviors. Different interior structures are generated for each part, and the interior structures are finally joined together. Experimental results demonstrate that the proposed hybrid structure obtains higher strength-to-weight ratio than recent competing approaches that use single types of interior structures. (C) 2018 Elsevier B.V. All rights reserved. |
关键词 | 3d Printing Hybrid Support Structure Tetrahedral Crystal Structure Muscle Fiber Structure Transient Structure |
WOS标题词 | Science & Technology ; Technology ; Physical Sciences |
DOI | 10.1016/j.cagd.2018.03.015 |
关键词[WOS] | OPTIMIZATION |
收录类别 | SCI ; ISTP |
语种 | 英语 |
项目资助者 | Beijing Natural Science Foundation(J170001 ; National Natural Science Foundation of China(61772523 ; Beijing Municipal Education Commission Science and Technology Innovation Project(KZ201610005012) ; 4184102) ; 61372168 ; 61620106003) |
WOS研究方向 | Computer Science ; Mathematics |
WOS类目 | Computer Science, Software Engineering ; Mathematics, Applied |
WOS记录号 | WOS:000434743900006 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ia.ac.cn/handle/173211/21687 |
专题 | 多模态人工智能系统全国重点实验室_多媒体计算 |
通讯作者 | Dong-Ming Yan |
作者单位 | 1.Beijing Univ Technol, Coll Informat & Commun Engn, Beijing 100124, Peoples R China 2.Chinese Acad Sci, Inst Automat, Natl Lab Pattern Recognit, Beijing 100190, Peoples R China 3.Chinese Univ Hong Kong, Sch Sci & Engn, Shenzhen 518172, Peoples R China 4.SUNY Buffalo, Dept Comp Sci & Engn, Buffalo, NY 14260 USA 5.Shandong Univ, Jinan, Shandong, Peoples R China |
推荐引用方式 GB/T 7714 | Mao, Yuxin,Wu, Lifang,Yan, Dong-Ming,et al. Generating hybrid interior structure for 3D printing[J]. COMPUTER AIDED GEOMETRIC DESIGN,2018,62(0):63-72. |
APA | Mao, Yuxin.,Wu, Lifang.,Yan, Dong-Ming.,Guo, Jianwei.,Chen, Chang Wen.,...&Dong-Ming Yan.(2018).Generating hybrid interior structure for 3D printing.COMPUTER AIDED GEOMETRIC DESIGN,62(0),63-72. |
MLA | Mao, Yuxin,et al."Generating hybrid interior structure for 3D printing".COMPUTER AIDED GEOMETRIC DESIGN 62.0(2018):63-72. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
2018_CAGD_Hybrid.pdf(2625KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论