CASIA OpenIR  > 类脑智能研究中心  > 微观重建与智能分析
Quality metrology of carbon nanotube thin films and its application for carbon nanotube-based electronics
Zhao, Jie1,2; Shen, Lijun3,4; Liu, Fang1,2; Zhao, Pan3,5; Huang, Qi1,2; Han, Hua3,4; Peng, Lianmao1,2; Liang, Xuelei1,2
发表期刊NANO RESEARCH
ISSN1998-0124
2020-05-15
页码7
通讯作者Liang, Xuelei(liangxl@pku.edu.cn)
摘要Large area, highly uniform, and density controllable carbon nanotube (CNT) films, either well-aligned or random network, are required for practical application of CNT-based electronics. Mass production methods for such CNT films and corresponding quality metrology, which are critical for pushing the CNT-based transistor technology to manufacturing, should be developed in advance. Much progress has been made on fabrication of CNT films; however, there still lacks a metrology for thoroughly quantifying their quality until now. In this paper, through comparing study of CNT films fabricated by dip-coating (DC) and direct deposition (DD) methods, local anisotropy in the film is revealed to impact the performance uniformity of devices so fabricated in a spatial scale dependent manner. The anisotropy effect should be taken into account for the quality characterization of CNT films, which was not noticed in previous studies. Based on these findings, we propose a four-parameter metrology to quantify the overall quality of the CNT films, which includes the local tube density (D-L), global density uniformity (C-v), local degree of order (O-L), and the relative tube proportion in a certain orientation (P-theta) at a location. The four-parameter characterization and corresponding device performance confirm DC films are superior to DD films for practical application. The four-parameter metrology is not only powerful for overall quality evaluation of CNT films, but also able to predict the fluctuation of devices' performance. Therefore, this material metrology is important for devices and circuits design and valuable for pushing the CNT-based transistor technology forward.
关键词carbon nanotube thin films quality metrology local anisotropy transistors
DOI10.1007/s12274-020-2801-1
关键词[WOS]SELECTIVE DISPERSION ; TRANSISTORS ; ALIGNMENT ; MECHANISM ; NETWORKS
收录类别SCI
语种英语
资助项目National Key Research and Development Program[2016YFA0201902] ; National Natural Science Foundation of China[61621061] ; National Natural Science Foundation of China[51991341] ; Instrument Function Development Innovation Program of Chinese Academy of Sciences[282019000057] ; Special Program of Beijing Municipal Science & Technology Commission[Z181100000118002] ; Special Program of Beijing Municipal Science & Technology Commission[Z181100003818001]
项目资助者National Key Research and Development Program ; National Natural Science Foundation of China ; Instrument Function Development Innovation Program of Chinese Academy of Sciences ; Special Program of Beijing Municipal Science & Technology Commission
WOS研究方向Chemistry ; Science & Technology - Other Topics ; Materials Science ; Physics
WOS类目Chemistry, Physical ; Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Physics, Applied
WOS记录号WOS:000533033200001
出版者TSINGHUA UNIV PRESS
引用统计
被引频次:13[WOS]   [WOS记录]     [WOS相关记录]
文献类型期刊论文
条目标识符http://ir.ia.ac.cn/handle/173211/39471
专题类脑智能研究中心_微观重建与智能分析
通讯作者Liang, Xuelei
作者单位1.Peking Univ, Ctr Carbon Based Elect, Beijing 100871, Peoples R China
2.Peking Univ, Dept Elect, Key Lab Phys & Chem Nanodevices, Beijing 100871, Peoples R China
3.Chinese Acad Sci, Inst Automat, Natl Lab Pattern Recognit, Beijing 100190, Peoples R China
4.Univ Chinese Acad Sci, Sch Future Technol, Beijing 100049, Peoples R China
5.Harbin Univ Sci & Technol, Inst Automat, Harbin 150080, Peoples R China
推荐引用方式
GB/T 7714
Zhao, Jie,Shen, Lijun,Liu, Fang,et al. Quality metrology of carbon nanotube thin films and its application for carbon nanotube-based electronics[J]. NANO RESEARCH,2020:7.
APA Zhao, Jie.,Shen, Lijun.,Liu, Fang.,Zhao, Pan.,Huang, Qi.,...&Liang, Xuelei.(2020).Quality metrology of carbon nanotube thin films and its application for carbon nanotube-based electronics.NANO RESEARCH,7.
MLA Zhao, Jie,et al."Quality metrology of carbon nanotube thin films and its application for carbon nanotube-based electronics".NANO RESEARCH (2020):7.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Zhao, Jie]的文章
[Shen, Lijun]的文章
[Liu, Fang]的文章
百度学术
百度学术中相似的文章
[Zhao, Jie]的文章
[Shen, Lijun]的文章
[Liu, Fang]的文章
必应学术
必应学术中相似的文章
[Zhao, Jie]的文章
[Shen, Lijun]的文章
[Liu, Fang]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。