Knowledge Commons of Institute of Automation,CAS
A novel kinematic calibration method for a handling robot based on optimal trajectory planning | |
Lei Ding1,2; En Li1; Zize Liang1; Min Tan1 | |
2016 | |
会议名称 | IEEE International Conference on Robotics and Biomimetics |
会议录名称 | IEEE International Conference on Robotics and Biomimetics |
页码 | 927-932 |
会议日期 | 2016.12 |
会议地点 | Qingdao |
摘要 | Kinematic calibration is of great significance to the application of handling robot in the field of stamping industry. In this paper, a novel kinematic calibration method of a 5-DOF handling robot is proposed based on optimal trajectory planning. In order to illustrate our independently developed mechanical structure composed of three rotary joints and two translational joints, the forward kinematic model is constructed using the MDH method. And then, we establish the error model according to the difference between the theoretical position and actual position of robot end effector. Furthermore, a low cost vision measurement system is designed with single camera and self-designed target, while the optimal trajectory for kinematic calibration consisted of calibration points is obtained by Genetic Algorithm (GA). Finally, two simulation experiments are executed to verify the effectiveness and efficiency of our kinematic calibration method. |
关键词 | Kinematic Calibration Optimal Trajectory Planning 5-dof Handling Robot |
DOI | 10.1109/ROBIO.2016.7866443 |
收录类别 | EI |
引用统计 | |
文献类型 | 会议论文 |
条目标识符 | http://ir.ia.ac.cn/handle/173211/12103 |
专题 | 复杂系统认知与决策实验室_先进机器人 |
通讯作者 | En Li |
作者单位 | 1.中国科学院自动化研究所 2.中国科学院大学 |
第一作者单位 | 中国科学院自动化研究所 |
通讯作者单位 | 中国科学院自动化研究所 |
推荐引用方式 GB/T 7714 | Lei Ding,En Li,Zize Liang,et al. A novel kinematic calibration method for a handling robot based on optimal trajectory planning[C],2016:927-932. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
A novel kinematic ca(882KB) | 会议论文 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论