Knowledge Commons of Institute of Automation,CAS
A Signal Based “W” Structural Elements for Multi-scale Mathematical Morphology Analysis and Application to Fault Diagnosis of Rolling Bearings of Wind Turbines | |
Qiang Li1,2![]() | |
发表期刊 | International Journal of Automation and Computing
![]() |
ISSN | 1476-8186 |
2021 | |
卷号 | 18期号:6页码:993-1006 |
摘要 | Working conditions of rolling bearings of wind turbine generators are complicated, and their vibration signals often show non-linear and non-stationary characteristics. In order to improve the efficiency of feature extraction of wind turbine rolling bearings and to strengthen the feature information, a new structural element and an adaptive algorithm based on the peak energy are proposed, which are combined with spectral correlation analysis to form a fault diagnosis algorithm for wind turbine rolling bearings. The proposed method firstly addresses the problem of impulsive signal omissions that are prone to occur in the process of fault feature extraction of traditional structural elements and proposes a “W” structural element to capture more characteristic information. Then, the proposed method selects the scale of multi-scale mathematical morphology, aiming at the problem of multi-scale mathematical morphology scale selection and structural element expansion law. An adaptive algorithm based on peak energy is proposed to carry out morphological scale selection and structural element expansion by improving the computing efficiency and enhancing the feature extraction effect. Finally, the proposed method performs spectral correlation analysis in the frequency domain for an unknown signal of the extracted feature and identifies the fault based on the correlation coefficient. The method is verified by numerical examples using experimental rig bearing data and actual wind field acquisition data and compared with traditional triangular and flat structural elements. The experimental results show that the new structural elements can more effectively extract the pulses in the signal and reduce noise interference, and the fault-diagnosis algorithm can accurately identify the fault category and improve the reliability of the results. |
关键词 | Fault diagnosis structural element multi-scale mathematical morphology rolling bearing correlation analysis |
DOI | 10.1007/s11633-021-1305-0 |
七大方向——子方向分类 | 其他 |
国重实验室规划方向分类 | 其他 |
是否有论文关联数据集需要存交 | 否 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ia.ac.cn/handle/173211/46105 |
专题 | 学术期刊_Machine Intelligence Research |
作者单位 | 1.Institute of Electric Power, Inner Mongolia University of Technology, Hohhot 010080, China 2.Inner Mongolia Key Laboratory of Electrical and Mechanical Control, Hohhot 010051, China 3.Faculty of Information, Beijing University of Technology, Beijing 100124, China |
推荐引用方式 GB/T 7714 | Qiang Li,Yong-Sheng Qi,Xue-Jin Gao,等. A Signal Based “W” Structural Elements for Multi-scale Mathematical Morphology Analysis and Application to Fault Diagnosis of Rolling Bearings of Wind Turbines[J]. International Journal of Automation and Computing,2021,18(6):993-1006. |
APA | Qiang Li,Yong-Sheng Qi,Xue-Jin Gao,Yong-Ting Li,&Li-Qiang Liu.(2021).A Signal Based “W” Structural Elements for Multi-scale Mathematical Morphology Analysis and Application to Fault Diagnosis of Rolling Bearings of Wind Turbines.International Journal of Automation and Computing,18(6),993-1006. |
MLA | Qiang Li,et al."A Signal Based “W” Structural Elements for Multi-scale Mathematical Morphology Analysis and Application to Fault Diagnosis of Rolling Bearings of Wind Turbines".International Journal of Automation and Computing 18.6(2021):993-1006. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
IJAC-2021-02-034.pdf(1828KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论