Knowledge Commons of Institute of Automation,CAS
Contour Extraction and Quality Inspection for Inner Structure of Deep Hole Components | |
Gong XY(宫新一)1,2![]() ![]() ![]() ![]() ![]() | |
发表期刊 | IEEE Transactions on Components, Packaging and Manufacturing Technology
![]() |
2019-03 | |
卷号 | 9期号:3页码:575-585 |
摘要 | The paper focuses on the contour extraction for the inner wires of a kind of deep hole component to achieve a high-accuracy inspection. The vision system consisting of a camera and an endoscope is developed to acquire high-quality images of the internal structure. For the acquired images, a contour extraction method is proposed, which could be divided into the following steps. Firstly, the start points of wires referred as the prior information on the component are obtained with a predefined filter, and on the basis, several regions of interest (ROIs) are defined. Secondly, the multiscale probability of boundary (mpb) operator is utilized to detect edges in the ROIs. Thirdly, a Brownian motion model is established to calculate the connectivity between edges. The prior information obtained previously is used again to determine the probabilities of the edges belonging to the contours. Finally, the symmetric ratio contour (SRC) method is used to form the wires’ contours with the edges. In the proposed method, the edges belonging to the wires’ contours are enhanced by making full use of the prior information, resulting in the improvement in accuracy and real-time performance. As evidenced by the experiments, the proposed method can efficiently extract the inner wires’ contours from the component’s image with low contrast conditions, noises and shadows. |
关键词 | Brownian Motion, Edge Grouping, Contour Extraction, Deep-hole Component |
收录类别 | SCI |
语种 | 英语 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ia.ac.cn/handle/173211/23675 |
专题 | 中国科学院工业视觉智能装备工程实验室_精密感知与控制 |
通讯作者 | Huabin Yang |
作者单位 | 1.中国科学院自动化研究所 2.中国科学院大学人工智能学院 |
第一作者单位 | 中国科学院自动化研究所 |
通讯作者单位 | 中国科学院自动化研究所 |
推荐引用方式 GB/T 7714 | Gong XY,Hu Su,De Xu,et al. Contour Extraction and Quality Inspection for Inner Structure of Deep Hole Components[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology,2019,9(3):575-585. |
APA | Gong XY,Hu Su,De Xu,Huabin Yang,Zhengtao Zhang,&Lei Zhang.(2019).Contour Extraction and Quality Inspection for Inner Structure of Deep Hole Components.IEEE Transactions on Components, Packaging and Manufacturing Technology,9(3),575-585. |
MLA | Gong XY,et al."Contour Extraction and Quality Inspection for Inner Structure of Deep Hole Components".IEEE Transactions on Components, Packaging and Manufacturing Technology 9.3(2019):575-585. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Contour Extraction a(1336KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论